84.56 Machine-tools for working any material by removal of material, by laser or other light or photon beam, ultra￢sonic, electro-discharge, electro-chemical, electron beam, ionic-beam or plasma arc processes; water-jet cutting machines.

(ⅰ) They must work by removing material;

(ⅱ) They must carry out operations of the kind performed by machine-tools equipped with conventional tools;

(ⅲ) They must use one of the following seven processes : laser or other light or photon beam, ultrasonic, electro discharge, electro-chemical, electron beam, ionic-beam or plasma arc.

(ⅰ) Machines for working any material by removal of material, of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays.

(ⅱ) Machines for working any material by removal of material, of a kind used solely or principally for the manufacture or repair of masks and reticles.

(ⅲ) Machines for dry-etching patterns on semiconductor materials.

Examples of the foregoing products are (1) laser-beam machine tools which drill semiconductor crystals and (2) ultrasonic process machine-tools which cut semiconductor chips or which cut or drill ceramic substrates for integrated circuits.

(A) MACHINE-TOOLS FOR WORKING BY LASER OR OTHER LIGHT OR PHOTON BEAM PROCESSES
Laser-beam machining (photonic machining) consists of bombarding a target with photons. This group covers, in particular, machines for drilling (metals, rubies for watches, etc.), machines for cutting metals or other hard materials and machines for engraving (figures, letters, lines, etc.) on various highly resistant materials.
The principle of the machine-tools operated by laser processes is the removal of material by melting, burning or vaporization (also referred to as "ablation"), which are caused by a focused intense laser beam directed at the workpiece. In certain machinetools of this type, the laser beam may be coupled into a low-pressure water jet, which is used to guide the laser beam, and to remove debris and cool the material.
The other machine-tools of this group differ from the machine-tools operated by laser beam processes by the type of beam used for the removal of material.

(B) MACHINE-TOOLS FOR WORKING BY ULTRASONIC PROCESSES
Ultrasonic machine tools consist of a punch subjected to ultrasonic vibrations and an abrasive in suspension in a liquid. These machines may incorporate an abrasive recycling system.
This group includes machine tools which are used, in particular :

(1) For working diamond or metal carbide dies;

(2) For drilling or shaping minerals;

(3) For engraving glass;

(4) For milling, broaching or polishing.

(C) MACHINE-TOOLS FOR WORKING BY ELECTRO-DISCHARGE PROCESSES
The principle of this type of machining is the removal of metal between two metallic electrodes (the workpiece and the tool) by sudden electrical discharges of very short duration at the rate of several hundred thousand cycles per second. This group covers, for example, high frequency electric spark cutting machines.

(D) MACHINE-TOOLS FOR WORKING BY ELECTRO-CHEMICAL PROCESSES
The principle of this type of machining is the removal of metal by electrolysis. The workpiece (anode) is a conductor of electricity as is the tool (cathode). Both are submerged in a selected electrolyte which makes cathodic deposition impossible, and all that occurs is anodic dissolution.
This group includes :

(1) Electrolytic polishing apparatus, used for polishing specimens for microscopic or metallurgical examination.

(2) Electrolytic sharpeners for sharpening cutting tools, cutting chip breaker grooves or cutting metal carbide plates; these machines utilise a diamond wheel.

(3) Machines for deburring various kinds of gear wheel by anodic dissolution.

(4) Machines for precision finishing flat surfaces, etc.

(E) MACHINE TOOLS FOR WORKING BY ELECTRON BEAM PROCESSES
Electron beam machining consists of bombarding the workpiece on a very small surface with electrons emitted by a cathode, accelerated by an intense electrical field, and focussed by a system of magnetic or electrostatic lenses.

(F) MACHINE-TOOLS FOR WORKING BY IONIC-BEAM PROCESSES
The beam of these machine tools works by continuous action, not by impulses as in the case of the laser beam.

(G) MACHINE-TOOLS FOR WORKING BY PLASMA ARC PROCESSES
Plasma arc machining involves intense ionisation of a gas by means of an electric current produced by a magnetic impulse generator under high tension. It permits cutting plates at a very high speed and rough cutting and machining coarse feeding threads.

(H) WATER-JET CUTTING MACHINES
This group includes water-jet and water-abrasive jet cutting machines. These are machines designed to cut materials by a process using streams of water or of water mixed with very fine abrasives, typically at a velocity of 2 to 3 times the speed of sound. They operate under pressures of 3,000 to 4,000 bars and are capable of making multiple types of precision cuts in a variety of materials. Water-jet cutting machines are typically used for softer materials (foam, soft rubber, gasket material, foils, etc.). Water-abrasive jet cutting machines are typically used for harder materials (tool steel, hard rubber, composites, stone, glass, aluminium, stainless steel, etc.).

(a) Ultrasonic apparatus for cleaning (heading 84.79).

(b) Soldering, brazing or welding machines and apparatus, whether or not capable of cutting (heading 85.15).

(c) Testing machines (heading 90.24).

HOME ｜ 이용약관 ｜ 개인정보취급방침 ｜ 도움말 ｜ 원격지원 ｜ 문제해결 ｜ About

[씨엘관세정보] 경기도 시흥시 서울대학로278번길 70 B동 1212호  [사업자번호] 137-10-87138  [대표] 박중광   clhs@clhs.co.kr   070-8802-8300   070-4214-8300