|
72.01 Pig iron and, Spiegeleisen in pigs, blocks or other primary forms.
(A) PIG IRON
Pig iron is defined by Note 1 (a) to this Chapter. However, chromium steels containing more than 2 % of carbon are by application of Note 1 (d) to this Chapter to be classified with the other alloyed steels in sub Chapter IV.
Pig iron is the main primary product of the iron and steel industry, being produced principally by reducing and smelting iron ore in blast furnaces or by smelting ferrous waste and scrap in electric furnaces or cupola furnaces. It is an iron carbon alloy also containing other elements such as silicon, manganese, sulphur and phosphorus, derived from the ore, scrap, flux or fuel, and sometimes also other elements such as chromium and nickel, added to impart special properties.
The heading covers both crude pig iron and pig iron which has been remelted for convenience and to obtain a certain degree of refining, blending or alloying, provided the composition of the metal remains within the limits specified in the definition under Note 1 (a). Pig iron may be in the form of pigs, blocks, lumps, whether or not broken, or in the molten state, but the heading does not extend to shaped or worked articles (e.g., rough or finished castings or tubes).
Pig iron is characteristically brittle and unworkable; this can be remedied to some extent by annealing which gives the product superficially some of the properties of steel, the product being known as "malleable cast iron" (whiteheart or blackheart). In practice, the treatment is applied generally to cast articles, which are classified elsewhere, but any such material in the primary forms of pigs, blocks, etc., would fall in this heading provided the carbon content exceeds 2 % by weight.
Alloy pig iron is pig iron containing, by weight, one or more of the elements mentioned in Subheading Note 1 (a) in the proportions specified in that Note. (B) SPIEGELEISEN
Spiegeleisen is defined in Note 1 (b) to this Chapter. It is sometimes considered in the trade as a ferro alloy but is classified in the same heading as pig iron since it is generally obtained directly from ores.
It is used principally in steel manufacture to de oxidise and recarburise the iron, and for alloying. It shows a glittering surface on fracture because of the high manganese content, and is presented in the same forms as pig iron.
|
제15부 비(卑)금속과 그 제품
> 제72류 철강
> 제7201호 선철 
clhs@clhs.co.kr 
070-4214-8300