This heading covers only the following fittings for headgear :(1) Head-bands for fitting on the inside edge of the crown. These are usually of leather, but may also be of composition leather, of oiled cloth or other coated fabric, etc. They are classified in this heading only when cut to length or otherwise ready for incorporation in the headgear. They frequently bear an inscription of the hat-makers name, etc. (2) Linings and part linings normally made of textile material but sometimes of plastics, leather, etc. These also usually bear a printed indication of the hat-makers name, etc.
It should be noted that labels of the kind used for attaching to the inside crown of the hat, etc., are not included in this heading. (3) Covers, generally of textile fabric or plastics. (4) Hat foundations; these may consist of stiffened fabric (e.g., buckram), of paperboard, papier mache, cork, pith, metal, etc. (5) Hat frames, e.g., wire frames (sometimes gimped with textile or other material) and spring frames for opera hats. (6) Peaks (e.g., for uniform or other caps). Peaks designed for wear mainly as eyeshades are classified as headgear if they incorporate a head piece (crown) of any kind, otherwise they are classified according to their constituent material. (7) Chinstraps; narrow strips or bands (including plaited strips) of leather, textile fabric, plastics, etc. They are usually made so that they may be adjusted to the required length. They may also serve as an ornamental trimming. Chinstraps are included in this heading only if they are ready for incorporation in headgear.
|
clhs@clhs.co.kr 
070-4214-8300